Southern Cameroons General Easier Edge Cutting With Scroll Saw

Easier Edge Cutting With Scroll Saw



A scroll saw a machine is a cutting machine whose work is almost similar to a jigsaw machine. The cutting edge moves up and down at high speed. The difference is that the scroll saw has a smaller cutting edge and is equipped with a table so that it is easier to make detailed angles or shapes that are difficult to make on other sawing machines. However, if you are looking for the best saw you need to see the hegner scroll saw review. Like other saw blades, there should be many types and sizes of the roughness of the scroll saw. But only these 2 types of eye scroll saw that you can mostly find, rough and smooth. With a smooth scroll saw an eye, we can make even small winding bends. Coarse scroll saw eyes are used to speed cutting.

Before installing, make sure the scroll saw plug is not connected to the socket to avoid unwanted things. How to install and use scroll saws may differ from one brand to another, for more details, read the user manual that is obtained when buying a scroll saw. Be sure to use glasses and other safety equipment when using the scroll saw. First, hook the scroll saw eye to the blade holder located at the bottom of the machine. Make sure the sharp part faces down. After that, hook the scroll saw eye to the upper blade holder. After that press the lever to lock the cutting eye. To adjust, turn the locking lever clockwise to tighten the eye of the scroll saw and in the reverse direction to loosen.

Before installing the plug to the socket, make sure the scroll saw switch is off. Press the switch to start the engine. Adjust the slope of the table, this slope will affect the results of the cut. Enter the wood to be cut along the lines that were made before. Also, point the blowing pipe towards the cut section so that the cut powders do not cover the line. When finished, turn off the switch and clean the engine of cut dust.

Tags: , ,

Leave a Reply

Your email address will not be published. Required fields are marked *